...the who's who,
and the what's what 
of the space industry

Space Careers

news Space News

Search News Archive

Title

Article text

Keyword

  • Home
  • News
  • NASA Perseverance Mars Rover to acquire first sample

NASA Perseverance Mars Rover to acquire first sample

Written by  Thursday, 22 July 2021 00:10
Write a comment
Pasadena CA (JPL) Jul 22, 2021
NASA is making final preparations for its Perseverance Mars rover to collect its first-ever sample of Martian rock, which future planned missions will transport to Earth. The six-wheeled geologist is searching for a scientifically interesting target in a part of Jezero Crater called the "Cratered Floor Fractured Rough." This important mission milestone is expected to begin within the next

NASA is making final preparations for its Perseverance Mars rover to collect its first-ever sample of Martian rock, which future planned missions will transport to Earth. The six-wheeled geologist is searching for a scientifically interesting target in a part of Jezero Crater called the "Cratered Floor Fractured Rough."

This important mission milestone is expected to begin within the next two weeks. Perseverance landed in Jezero Crater Feb. 18, and NASA kicked off the rover mission's science phase June 1, exploring a 1.5-square-mile (4-square-kilometer) patch of crater floor that may contain Jezero's deepest and most ancient layers of exposed bedrock.

"When Neil Armstrong took the first sample from the Sea of Tranquility 52 years ago, he began a process that would rewrite what humanity knew about the Moon," said Thomas Zurbuchen, associate administrator for science at NASA Headquarters. "I have every expectation that Perseverance's first sample from Jezero Crater, and those that come after, will do the same for Mars. We are on the threshold of a new era of planetary science and discovery."

It took Armstrong 3 minutes and 35 seconds to collect that first Moon sample. Perseverance will require about 11 days to complete its first sampling, as it must receive its instructions from hundreds of millions of miles away while relying on the most complex and capable, as well as the cleanest, mechanism ever to be sent into space - the Sampling and Caching System.

Precision Instruments Working Together
The sampling sequence begins with the rover placing everything necessary for sampling within reach of its 7-foot (2-meter) long robotic arm. It will then perform an imagery survey, so NASA's science team can determine the exact location for taking the first sample, and a separate target site in the same area for "proximity science."

"The idea is to get valuable data on the rock we are about to sample by finding its geologic twin and performing detailed in-situ analysis," said science campaign co-lead Vivian Sun, from NASA's Jet Propulsion Laboratory in Southern California. "On the geologic double, first we use an abrading bit to scrape off the top layers of rock and dust to expose fresh, unweathered surfaces, blow it clean with our Gas Dust Removal Tool, and then get up close and personal with our turret-mounted proximity science instruments SHERLOC, PIXL, and WATSON."

SHERLOC (Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals), PIXL (Planetary Instrument for X-ray Lithochemistry), and the WATSON (Wide Angle Topographic Sensor for Operations and eNgineering) camera will provide mineral and chemical analysis of the abraded target. Perseverance's SuperCam and Mastcam-Z instruments, both located on the rover's mast, will also participate. While SuperCam fires its laser at the abraded surface, spectroscopically measuring the resulting plume and collecting other data, Mastcam-Z will capture high-resolution imagery.

Working together, these five instruments will enable unprecedented analysis of geological materials at the worksite.

"After our pre-coring science is complete, we will limit rover tasks for a sol, or a Martian day," said Sun. "This will allow the rover to fully charge its battery for the events of the following day."

Sampling day kicks off with the sample-handling arm within the Adaptive Caching Assembly retrieving a sample tube, heating it, and then inserting it into a coring bit. A device called the bit carousel transports the tube and bit to a rotary-percussive drill on Perseverance's robotic arm, which will then drill the untouched geologic "twin" of the rock studied the previous sol, filling the tube with a core sample roughly the size of a piece of chalk.

Perseverance's arm will then move the bit-and-tube combination back into bit carousel, which will transfer it back into the Adaptive Caching Assembly, where the sample will be measured for volume, photographed, hermetically sealed, and stored. The next time the sample tube contents are seen, they will be in a clean room facility on Earth, for analysis using scientific instruments much too large to send to Mars.

"Not every sample Perseverance is collecting will be done in the quest for ancient life, and we don't expect this first sample to provide definitive proof one way or the other," said Perseverance project scientist Ken Farley, of Caltech. "While the rocks located in this geologic unit are not great time capsules for organics, we believe they have been around since the formation of Jezero Crater and incredibly valuable to fill gaps in our geologic understanding of this region - things we'll desperately need to know if we find life once existed on Mars."


Related Links
Mars 2020 Perseverance
Mars News and Information at MarsDaily.com
Lunar Dreams and more

Tweet

Thanks for being here;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

SpaceDaily Contributor
$5 Billed Once

credit card or paypal

SpaceDaily Monthly Supporter
$5 Billed Monthly

paypal only



MARSDAILY
Landing on Mars is one step closer for British-built rover
London, UK (SPX) Jul 05, 2021
A new and upgraded parachute for the UK-built Rosalind Franklin Mars rover has successfully passed a series of high-altitude tests, bringing further exploration of the Red Planet one step closer. Rosalind Franklin has been built with government backing to try to detect life, past or present, on the Red Planet. After several weeks of delays due to bad weather the latest tests to determine the parachutes' fitness for use in the harsh conditions of Mars saw the descent vehicle dropped from a st ... read more


Read more from original source...

You must login to post a comment.
Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.

Interested in Space?

Hit the buttons below to follow us...